Efficiency + Physics

Freshwater Maintenance with Accelerated Manual Systems

The latest innovation from PHIBER Systems, delivering highly efficient, convenient freshwater flush maintenance for outboard engines, vessel stabilization systems… and more!

Built for Your Overboard Systems

Cutaway view of a center console boat with multiple outboard engines and flush plumbing

Outboard Engines

Routine Freshwater Maintenance for multiple outboard engines using a single dock hose connection, flushing simultaneously through each engine’s native flush circuit.

Cutaway view of a sportfishing boat with a gyro stabilizer

Gyro Stabilizers

Routine Freshwater Maintenance for vessel Gyro-stabilization systems, flushing the heat exchangers to remove seawater and other contaminants, preventing corrosion.

Cutaway view of a single outboard boat with baitwell plumbing

Baitwells & Sea Chests

Freshwater flushing for biofouling & odor prevention for sea chest systems, including baitwells, air conditioning, heads and saltwater wash down networks.

Cutaway view of a cruising yacht with watermaker plumbing

And More

Compatible with any “overboard” seawater network that can benefit from routine freshwater flushing, including those applications that weren’t designed for flushing Maintenance.

*Exceptions apply.

See the PHLOW in Action...

The Evolution of "Freshwater Maintenance"

If your boat is stored on a lift, a trailer, or stays in the water, manually flushing individual engines and systems with a garden or dock hose can be physically challenging, time consuming, and expensive (with a flush sequencer)… until now.

When the convenience of a PHIBER Push-Button System isn’t an option, or a hose is your only source of fresh water, the PHIBER Accelerated Manual System streamlines the connection and the process.

A single Dock Hose Inlet mounts wherever it is convenient and safe to reach, so you no longer deal with hard-to-reach flush ports or the risky gymnastics of hooking a hose to each engine. From there, the patent-pending PHLOW Hub divides fresh water evenly to every engine with no loss in pressure or GPM.

One hose. Every engine. All at once.

"Accelerate" (verb): an Increase in Velocity

The PHIBER Accelerated Manual System was developed from the same “flow engineering” principles used in the push-button PHIBER Systems….

…but it can be installed by the DIY boat-owner, typically in an afternoon.

The Accelerated Manual Systems are the newest members of the PHIBER #phamily of freshwater maintenance solutions, deepening our commitment to provide real return-on-investment and unsurpassed value to the boating community.

Meet the PHLOW Hub.

The PHLOW Hub incorporates the simple physics used in fuel delivery manifolds on high-performance engines in Formula Race Cars. They are an engineered to perform using design principles that enhance freshwater flow WITHOUT the aid of mechanical valves, batteries, electronics, or supplemental pumps. 

Machined from T6061 aluminum alloy with oversized apertures and a unique inner partitioning chamber, the patent-pending PHLOW Hub splits flushing water smoothly and evenly, keeping GPM and pressure equal to every engine.

The design of the PHLOW Hub is so effective, it can often replace a more expensive, less efficient valve sequencer.

There are no maintenance protocols to keep it functional over time, and no points of failure points in its construction.

“Physics” don’t become outdated with changes in technology, so there is no “planned obsolescence” in the design of the PHLOW Hub.  It will last longer than the service life of the network(s) it serves, and will provide the same performance in 10 years as the day it is installed, enhancing the value of any vessel..

PHIBER PHLOW Hub and fittings on a dark surface
Diagram showing a dock hose inlet connecting to the PHLOW Hub

Which Manual System Is Right for You?

Replacing a Flush Sequencer?

Flush-sequencers use a series of electric gates or rotating valves that allow a garden hose to flush one engine at a time, and they eliminate the need to manually transition the hose from one engine to the next. Like every plastic, mechanical, and electrical device exposed to the harsh marine environment, they frequently fail, requiring replacement. The Sequencer Retrofit Kit seamlessly integrates into any existing Freshwater Flush plumbing network for Twin, Triple and most Quad-Engine configurations. It replaces the sequencer with the engineered PHLOW Hub, providing the boat owner with a simple, cost-effective upgrade that offers FASTER flushing, at less cost, and with no batteries, circuits, or valves to fail.

Starting Fresh?

If you’re tired of manually connecting a dock hose to multiple engines or other systems that require routine flushing, the PHLOW Hub can streamline your efforts. The Accelerated Manual Systems allow for simultaneous flushing of multiple networks using a single dock hose connection.

Before You Flush

Manual Systems work with applications that have up to 1/2″ diameter native flush plumbing. For a proper freshwater flush, you’ll need:

40 PSI

Minimum dock water pressure

1/2″ Hose

Minimum dock hose diameter

2 GPM

Minimum flow rate for each engine or application

Right After Use

Flush with engines off and at operating temperature

FWF Duration

Follow OEM guidelines for prescribed duration

Seawater & You

Curious about what your most frequented water can do to your vessel’s systems? 
Select yours below:

Inland/Enclosed Waterways

Retrofits

Peace of Mind for All Your Voyages Ahead

Biofouling, corrosion, and scale don’t skip days. Your freshwater maintenance cycle shouldn’t either. The PHIBER Accelerated Manual Systems makes freshwater maintenance simple and efficient enough to do after every trip, with one hose and simple physics.

All PHIBER Systems are made in USA, and include an industry-leading 2-YEAR warranty that covers the system, labor, materials, and even delivery to the boat.

Questions? Email sales@PHIBERSystems.com